Aucun produit
En savoir plus
The ALG AK Trigger Ultimate with Lightning Bow (AKT-UL) is a single stage trigger is designed for the AK47 and AK74 variant platforms. The AKT-UL features a shorter pull and a crisper reset than the AKT standard version which is ideal for precision and target shooting. It is machined from gun quality alloy steel.
The AKT-UL features the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT-UL is proudly made in North Wales PA, USA, and lends three parts towards 922(r) Compliance.
Note: The ALG AKT (EL/UL) is not compatible with the 12 Gauge and 308 / 7.62x54r variants
The AK Trigger Ultimate with Lightning Bow (AKT-UL) is a single stage trigger is designed for the AK47 and AK74 variant platforms.
The ALG Defense AK series of triggers were designed to work with most AK variants without fitting. With AK variants that have a rivet for the rear of the trigger guard, commonly acting as an anti-slap feature, this rivet should be no greater than 0.062 inches tall. Our AK series of triggers are designed to work with rivets that are 0.062 inches in height or less. If this rivet is higher than 0.062 inches, the rivet will have to be shaved down to allow for more clearance. Having improper clearance can result in damage to the disconnector itself.
Alternatively, if the user does not choose to modify the rivet, you can opt to modify the underside of the disconnector to increase the clearance between the bottom of the disconnector and the rivet in the receiver. It is not recommended to completely remove the tail of the disconnector as adverse issues may arise, such as trigger slap. Most users prefer to bevel (angle) the disconnector in the area that would contact the rivet. We recommend shaving down the rivet, not the disconnector tail.
Please note, we do recommend having a qualified gunsmith install and perform all fitting of fire control groups. AK receivers and parts coming from a wide origin of manufacture vary, there is no agreed upon set specifications. As such, fitting may be required. Please note the rivet and/or disconnect will need the proper clearance as per the chart below, failure to have the correct clearance will cause damage.“
Information: Pour acheter une arme à feu ou élément essentiel d'arme au sens de la loi, vous devez avoir ou être capable d'obtenir un permis d'acquisition (PAA) selon l'article 8 alinéa 1 LArm et ss et article 15 alinéa 1ss OArm
Si vous remplissez cette obligation et que vous achetez une arme à feu ou élément essentiel d'arme à feu, veuillez envoyer votre PAA signé à l'adresse suivante: Dynamik Arms SARL/Gmbh, 124 route d Annecy, 1257 La Croix-De-Rozon, Suisse
Pour la munition, nous avons besoin d'une copie d'un PAA de moins de 2 ans mentionnant le même calibre. Cette copie peut être en format pdf et nous être envoyée par e-mail.
Attention: Si vous n'avez pas un PAA ou avez des doutes quand à la possibilité de l'obtenir, n'achetez pas et demandez nous de plus amples informations. En cas de non respect des consignes, nous retiendrons 30% de la somme pour frais administratifs.
Leupold Optics : Pour Tous les Militaires. Police et les entités gouvernementales uniquement. Veuillez présenter une accréditation valide.
Avis d'exportatio : Certains articles sont contrôlés à l’exportation par la réglementation sur le trafic international des armes (ITAR). Ces contrôles prennent la forme de règlements d'exportation et d'exigences de licence.