LANTAC BMD™ Type A2, Blast Mitigation Device™ for the DGN556B & DGNAK47B Muzzle Brake Agrandir l'image

LANTAC BMD™ Type A2, Blast Mitigation Device™ for the DGN556B & DGNAK47B Muzzle Brake

LA00265

Nouveau produit

Attention : dernières pièces disponibles !

259.00 CHF TTC

En savoir plus

The BMD™ is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique 'through' ports that connect the muzzle brakes vertical vents to the outside atmosphere.
This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency.
The device also features sets of 'diffuser' grids positioned towards the top of the blast shield that assist in allowing gas to vent upwards as well as forwards at the time of firing, assisting even further in muzzle control.
Concussive muzzle blast is directed forwards, down range and away from other shooters and team mates.
Radial teeth at the exit aperture help to disrupt blast gas at it exits the device.

The BMD™ is mounted to the DGN556B™ Muzzle Brake through the use of an adapter collar. The collar is designed to fit as wide a range of brake outside diameters as possible and can effectively be mounted within the following size range:
.855'' to .872'' Diameter.
It is recommended that you use a quality set of vernier and check the outside diameter of your muzzle device before ordering.
Diameters outside the ranges listed may need additional gunsmith work to be fitted or may not be used with this product.
Measurements should be taken from the circular section of the brake marked with the 'LANTAC' logo.

The BMD™ mounts to the collar via the use of two rugged clips that must both be depressed together in order to remove the device from its mount..

The device ships with a vial of Rocksett that must be used to ensure all mounting set screws are retained in place when the adapter is mounted to the brake.
 
SPECIFICATION:
Caliber: 5.56X45mm / .223
Material: Milspec Gun Steel
Finish: Black Oxide
Dimensions: L: 2.570'', DIA of body at largest point: 1.600'', at smallest point: 1.185''
Width at mounting clips: 1.785''
Weight including all mounting hardware: 7.3oz
Designed for the DGN556B™ Dragon™ Muzzle Brake only
Full instructions included
Rocksett Included
Made in the USA.

Information: Pour acheter une arme à feu ou élément essentiel d'arme au sens de la loi, vous devez avoir ou être capable d'obtenir un permis d'acquisition (PAA) selon l'article 8 alinéa 1 LArm et ss et article 15 alinéa 1ss OArm

       Si vous remplissez cette obligation et que vous achetez une arme à feu ou élément essentiel d'arme à feu, veuillez envoyer votre PAA signé à l'adresse suivante:  Dynamik Arms SARL/Gmbh, 124 route d Annecy, 1257 La Croix-De-Rozon, Suisse

       Pour la munition, nous avons besoin d'une copie d'un PAA de moins de 2 ans mentionnant le même calibre. Cette copie peut être en format pdf et nous être envoyée par e-mail.

      Attention:  Si vous n'avez pas un PAA ou avez des doutes quand à la possibilité de l'obtenir, n'achetez pas et demandez nous de plus amples informations. En cas de non respect des consignes, nous retiendrons 30% de la somme pour frais administratifs.

 

Leupold Optics : Pour Tous les Militaires. Police et les entités gouvernementales uniquement. Veuillez présenter une accréditation valide.

Avis d'exportatio : Certains articles sont contrôlés à l’exportation par la réglementation sur le trafic international des armes (ITAR). Ces contrôles prennent la forme de règlements d'exportation et d'exigences de licence.